How do reused glide path files affect the cyclic fatigue resistance? / ¿Cómo afecta la reutilización de limas tipo glide path su resistencia a la fatiga cíclica?

ABSTRACT: The aim of this study was to compare the cyclic fatigue resistance (CFR) of PathFile (Dentsply Sirona, Ballaigues, Switzerland) and ScoutRace (FKG Dentaire, La Chaux-de-Fonds, Switzerland) glide path files which were either new or previously used. Forty PathFile (PF) 19/.02 and 40 ScoutRace (SR) 20/.02 instruments were used for this study. Half of the files in each group were used (PF-U and SR-U) in the 3D demo tooth models (FKG Dentaire, La Chaux-de-Fonds, Switzerland) for creating glide paths, while the other half was new (PF-N and SR-N) and directly subjected to the cyclic fatigue test. The new and used files (n=80) were rotated in the cyclic fatigue test device with an artificial stainless-steel canal (60° curvature, 5 mm radius 1.5 mm width and 3.0 mm depth) under the continuous irrigation with distilled water at 37°C until fracture occurred. Time to fracture was recorded and the Weibull reliability analysis was performed. Data were statistically analysed. Conformity to normal distribution was examined using the Shapiro-Wilk test. A paired two-sample t-test was used to compare the TTF values according to the time within the groups. The new instruments (PF-N and SR-N) showed better CFR than the used groups (PF-U and SR-U) (P SR-N>PF-U>SR-U. Reuse of both glide path instruments reduced the time to fracture and the cyclic fatigue resistance of the files.

RESUMEN: El objetivo de este estudio fue comparar la resistencia a la fatiga cíclica (CFR en inglés) de las limas PathFile (Dentsply Sirona, Ballaigues, Suiza) y ScoutRace (FKG Dentaire, La Chaux-de-Fonds, Suiza) de tipo glide path, nuevas o ya previamente utilizadas. Para este estudio se utilizaron 40 instrumentos PathFile (PF) 19/.02 y 40 ScoutRace (SR) 20/.02. La mitad de las limas de cada grupo se utilizaron (PF-U y SR-U) en los modelos dentales de demostración 3D (FKG Dentaire, La Chaux-de- Fonds, Suiza) para crear trayectorias de deslizamiento, mientras que la otra mitad se utilizaron nuevas directamente a la prueba de fatiga cíclica (PF-N y SR-N). Las limas nuevas y usadas (n=80) se hicieron girar en el dispositivo de prueba de fatiga cíclica con un canal artificial de acero inoxidable (curvatura de 60°, radio de 5mm, anchura de 1,5mm y profundidad de 3,0mm) bajo irrigación continua con agua destilada a 37°C hasta que se produjo la fractura. Se registró el tiempo hasta la fractura y se realizó el análisis de fiabilidad de Weibull. Los datos se analizaron estadísticamente. La conformidad con la distribución normal se examinó mediante la prueba de Shapiro- Wilk. Se utilizó una prueba t de dos muestras pareadas para comparar los valores de TTF según el tiempo dentro de los grupos. Los instrumentos nuevos (PF-N y SR- N) mostraron una mejor CFR que los grupos previamente utilizados (PF-U y SR-U) (p SR-N >PF-U >SR-U. La reutilización de ambos instrumentos tipo glide path redujo el tiempo hasta la fractura y la resistencia a la fatiga cíclica de las limas.

A CBCT based digital analysis of shaping ability of Max Wire® alloy file in the treatment of large and curved root canals

Aim: To evaluate the limits of the shaping ability of MaxWire® alloy file in the treatment of pre-created large and curved root canals with different apical sizes by using cone-beam computed tomography (CBCT). Materials and methods: Forty-five permanent maxillary first molars with moderately curved palatal roots (20°-30°) were divided into three groups, and large root canals were created with apical diameter #35 (Group 1), #40 (Group 2) or #50 (Group 3) by using BioRace NiTi System. Then, they were reshaped with the MaxWire alloy file, XP-endo Shaper®. Canals were scanned before and after instrumentation by using the CBCT scanner. Canal transportation (CT), centering ratio (CR), % increased prepared area (PA), and % increased prepared outline (PO) at 2, 3, and 4 mm from the apex were calculated. Data were statistically analyzed at P < 0.05. Results: There was a significant difference in the mean increase in PO in all apical sizes and all three levels. At both 3 mm and 4 mm levels the maximum PA and PO were achieved in apical size 35, while at 2 mm level the maximum values were obtained in apical size 40. There was no statistically significant difference in CT and CR within groups at 2 mm distance from the apex. Conclusion: Max Wire alloy technology of this novel instrument makes it possible to clean and touch the dentin walls of large and curved root canals. Small FOV and small voxel size of CBCT could also be used in shaping ability studies in endodontics.